这篇文章主要介绍了如何用三台虚拟机搭建一套Ceph分布式系统，步骤简洁但不失准确性。环境清理一小节可以解决绝大多数部署不成功的问题，最后一节介绍了常用的Ceph操作，希望能给刚搭建环境的同学一些帮助。

三台装有CentOS 7的主机，每台主机有三个磁盘(虚拟机磁盘要大于100G),详细信息如下：

[root@ceph-1~]# cat /etc/redhat-release
CentOS Linux release 7.2.1511 (Core)
[root@ceph-1 ~]# lsblk
NAME            MAJ:MINRM   SIZE RO TYPE MOUNTPOINT
sda              8:0    0   128G  0 disk
├─sda1           8:1    0   500M  0 part /boot
└─sda2           8:2    0 127.5G  0 part
 ├─centos-root 253:0    0    50G 0 lvm  /
 ├─centos-swap 253:1    0     2G 0 lvm  [SWAP]
  └─centos-home 253:2    0  75.5G  0 lvm /home
sdb              8:16   0     2T  0 disk
sdc              8:32   0     2T  0 disk
sdd              8:48   0     2T  0 disk
sr0             11:0    1  1024M  0 rom 
[root@ceph-1 ~]# cat /etc/hosts
..
192.168.57.222ceph-1                                                                                                                                      
192.168.57.223ceph-2                                                                                                                                      
192.168.57.224 ceph-3  

 集群配置如下：

如果之前部署失败了，不必删除ceph客户端，或者重新搭建虚拟机，只需要在每个节点上执行如下指令即可将环境清理至刚安装完ceph客户端时的状态！强烈建议在旧集群上搭建之前清理干净环境，否则会发生各种异常情况。

psaux|grep ceph |awk '{print $2}'|xargs kill -9
ps -ef|grep ceph
#确保此时所有ceph进程都已经关闭！！！如果没有关闭，多执行几次。
umount /var/lib/ceph/osd/*
rm -rf /var/lib/ceph/osd/*
rm -rf /var/lib/ceph/mon/*
rm -rf /var/lib/ceph/mds/*
rm -rf /var/lib/ceph/bootstrap-mds/*
rm -rf /var/lib/ceph/bootstrap-osd/*
rm -rf /var/lib/ceph/bootstrap-rgw/*
rm -rf /var/lib/ceph/tmp/*
rm -rf /etc/ceph/*
rm -rf /var/run/ceph/*

需要在每个主机上执行以下指令

yumclean all
rm -rf /etc/yum.repos.d/*.repo
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
sed -i '/aliyuncs/d' /etc/yum.repos.d/CentOS-Base.repo
sed -i '/aliyuncs/d' /etc/yum.repos.d/epel.repo
sed -i 's/$releasever/7/g' /etc/yum.repos.d/CentOS-Base.repo

增加ceph的源:

vim/etc/yum.repos.d/ceph.repo

添加以下内容：

[ceph]
name=ceph
baseurl=http://mirrors.163.com/ceph/rpm-jewel/el7/x86_64/
gpgcheck=0
[ceph-noarch]
name=cephnoarch
baseurl=http://mirrors.163.com/ceph/rpm-jewel/el7/noarch/
gpgcheck=0

安装ceph客户端：

yummakecache
yum install ceph ceph-radosgw rdate -y

关闭selinux&firewalld

sed-i 's/SELINUX=.*/SELINUX=disabled/' /etc/selinux/config
setenforce 0
systemctl stop firewalld
systemctl disable firewalld

同步各个节点时间：

yum-y install rdate
rdate -s time-a.nist.gov
echo rdate -s time-a.nist.gov >> /etc/rc.d/rc.local
chmod +x /etc/rc.d/rc.local

在部署节点(ceph-1)安装ceph-deploy，下文的部署节点统一指ceph-1：

[root@ceph-1~]# yum -y install ceph-deploy
[root@ceph-1 ~]# ceph-deploy --version
1.5.34
[root@ceph-1 ~]# ceph -v
ceph version 10.2.2 (45107e21c568dd033c2f0a3107dec8f0b0e58374)

在部署节点创建部署目录并开始部署：

[root@ceph-1~]# cd
[root@ceph-1 ~]# mkdir cluster
[root@ceph-1 ~]# cd cluster/
[root@ceph-1 cluster]# ceph-deploy new ceph-1 ceph-2 ceph-3

如果之前没有ssh-copy-id到各个节点，则需要输入一下密码，过程log如下：

[ceph_deploy.conf][DEBUG] found configuration file at: /root/.cephdeploy.conf
[ceph_deploy.cli][INFO  ] Invoked (1.5.34): /usr/bin/ceph-deploy newceph-1 ceph-2 ceph-3
[ceph_deploy.cli][INFO  ] ceph-deploy options:
[ceph_deploy.cli][INFO  ] username                     : None
[ceph_deploy.cli][INFO  ] func                         : <function new at 0x7f91781f96e0>
[ceph_deploy.cli][INFO  ] verbose                      : False
[ceph_deploy.cli][INFO  ] overwrite_conf               : False
[ceph_deploy.cli][INFO  ] quiet                        : False
[ceph_deploy.cli][INFO  ] cd_conf                      : <ceph_deploy.conf.cephdeploy.Conf instance at 0x7f917755ca28>
[ceph_deploy.cli][INFO  ] cluster                      : ceph
[ceph_deploy.cli][INFO  ] ssh_copykey                  : True
[ceph_deploy.cli][INFO  ]  mon                          :['ceph-1', 'ceph-2', 'ceph-3']
..
..
ceph_deploy.new][WARNIN] could not connect via SSH
[ceph_deploy.new][INFO  ] will connect again with password prompt
The authenticity of host 'ceph-2 (192.168.57.223)' can't be established.
ECDSA key fingerprint is ef:e2:3e:38:fa:47:f4:61:b7:4d:d3:24:de:d4:7a:54.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'ceph-2,192.168.57.223' (ECDSA) to the list of knownhosts.
root
root@ceph-2's password:
[ceph-2][DEBUG ] connected to host: ceph-2
..
..
[ceph_deploy.new][DEBUG ] Resolving host ceph-3
[ceph_deploy.new][DEBUG ] Monitor ceph-3 at 192.168.57.224
[ceph_deploy.new][DEBUG ] Monitor initial members are ['ceph-1', 'ceph-2','ceph-3']
[ceph_deploy.new][DEBUG ] Monitor addrs are ['192.168.57.222','192.168.57.223', '192.168.57.224']
[ceph_deploy.new][DEBUG ] Creating a random mon key...
[ceph_deploy.new][DEBUG ] Writing monitor keyring to ceph.mon.keyring...
[ceph_deploy.new][DEBUG ] Writing initial config to ceph.conf...

此时，目录内容如下：

[root@ceph-1cluster]# ls
ceph.conf  ceph-deploy-ceph.log  ceph.mon.keyring

根据自己的IP配置向ceph.conf中添加public_network，并稍微增大mon之间时差允许范围(默认为0.05s，现改为2s)：

[root@ceph-1cluster]# echo public_network=192.168.57.0/24 >> ceph.conf
[root@ceph-1 cluster]# echo mon_clock_drift_allowed = 2 >> ceph.conf
[root@ceph-1 cluster]# cat ceph.conf
[global]
fsid = 0248817a-b758-4d6b-a217-11248b098e10
mon_initial_members = ceph-1, ceph-2, ceph-3
mon_host = 192.168.57.222,192.168.57.223,192.168.57.224
auth_cluster_required = cephx
auth_service_required = cephx
auth_client_required = cephx

public_network=192.168.57.0/24
mon_clock_drift_allowed = 2

开始部署monitor：

[root@ceph-1cluster]# ceph-deploy mon create-initial
..
..若干log
[root@ceph-1 cluster]# ls
ceph.bootstrap-mds.keyring  ceph.bootstrap-rgw.keyring ceph.conf            ceph.mon.keyring
ceph.bootstrap-osd.keyring  ceph.client.admin.keyring  ceph-deploy-ceph.log

查看集群状态：

[root@ceph-1cluster]# ceph -s
    cluster 0248817a-b758-4d6b-a217-11248b098e10
     health HEALTH_ERR
            no osds
            Monitorclock skew detected
     monmap e1: 3 mons at{ceph-1=192.168.57.222:6789/0,ceph-2=192.168.57.223:6789/0,ceph-3=192.168.57.224:6789/0}
            electionepoch 6, quorum 0,1,2 ceph-1,ceph-2,ceph-3
     osdmap e1: 0 osds: 0 up, 0 in
            flagssortbitwise
      pgmap v2: 64 pgs, 1 pools, 0 bytes data, 0objects
            0 kB used, 0kB / 0 kB avail
                 64 creating

开始部署OSD：

ceph-deploy--overwrite-conf osd prepare ceph-1:/dev/sdb ceph-1:/dev/sdc ceph-1:/dev/sddceph-2:/dev/sdb ceph-2:/dev/sdc ceph-2:/dev/sdd ceph-3:/dev/sdb ceph-3:/dev/sdcceph-3:/dev/sdd  --zap-disk
ceph-deploy --overwrite-conf osd activate ceph-1:/dev/sdb1 ceph-1:/dev/sdc1ceph-1:/dev/sdd1 ceph-2:/dev/sdb1 ceph-2:/dev/sdc1 ceph-2:/dev/sdd1ceph-3:/dev/sdb1 ceph-3:/dev/sdc1 ceph-3:/dev/sdd1

我在部署的时候出了个小问题，有一个OSD没成功(待所有OSD部署完毕后，再重新部署问题OSD即可解决)，如果不出意外的话，集群状态应该如下：

[root@ceph-1cluster]# ceph -s
    cluster 0248817a-b758-4d6b-a217-11248b098e10
     health HEALTH_WARN
            too few PGsper OSD (21 < min 30)
     monmap e1: 3 mons at{ceph-1=192.168.57.222:6789/0,ceph-2=192.168.57.223:6789/0,ceph-3=192.168.57.224:6789/0}
            electionepoch 22, quorum 0,1,2 ceph-1,ceph-2,ceph-3
     osdmap e45: 9 osds: 9 up, 9 in
            flagssortbitwise
      pgmap v82: 64 pgs, 1 pools, 0 bytes data, 0objects
            273 MB used,16335 GB / 16336 GB avail
                 64 active+clean

去除这个WARN，只需要增加rbd池的PG就好：

[root@ceph-1cluster]# ceph osd pool set rbd pg_num 128
set pool 0 pg_num to 128
[root@ceph-1 cluster]# ceph osd pool set rbd pgp_num 128
set pool 0 pgp_num to 128
[root@ceph-1 cluster]# ceph -s
    cluster 0248817a-b758-4d6b-a217-11248b098e10
     health HEALTH_ERR
            19 pgs arestuck inactive for more than 300 seconds
            12 pgspeering
            19 pgs stuckinactive
     monmap e1: 3 mons at{ceph-1=192.168.57.222:6789/0,ceph-2=192.168.57.223:6789/0,ceph-3=192.168.57.224:6789/0}
            electionepoch 22, quorum 0,1,2 ceph-1,ceph-2,ceph-3
     osdmap e49: 9 osds: 9 up, 9 in
            flagssortbitwise
      pgmap v96: 128 pgs, 1 pools, 0 bytes data, 0objects
            308 MB used,18377 GB / 18378 GB avail
                103 active+clean
                 12 peering
                  9 creating
                  4 activating
[root@ceph-1 cluster]# ceph -s
    cluster 0248817a-b758-4d6b-a217-11248b098e10
     health HEALTH_OK
     monmap e1: 3 mons at {ceph-1=192.168.57.222:6789/0,ceph-2=192.168.57.223:6789/0,ceph-3=192.168.57.224:6789/0}
            electionepoch 22, quorum 0,1,2 ceph-1,ceph-2,ceph-3
     osdmap e49: 9 osds: 9 up, 9 in
            flagssortbitwise
      pgmap v99: 128 pgs, 1 pools, 0 bytes data, 0objects
            310 MB used,18377 GB / 18378 GB avail
                128 active+clean

至此，集群部署完毕。

请不要使用直接修改某个节点的/etc/ceph/ceph.conf文件的方式，而是去部署节点(此处为ceph-1:/root/cluster/ceph.conf)目录下修改。因为节点到几十个的时候，不可能一个个去修改的，采用推送的方式快捷安全！修改完毕后，执行如下指令，将conf文件推送至各个节点：

[root@ceph-1cluster]# ceph-deploy --overwrite-conf config push ceph-1 ceph-2 ceph-3

此时，需要重启各个节点的monitor服务，见下一节。

#monitor start/stop/restart
#ceph-1为各个monitor所在节点的主机名。
systemctl start [email protected]
systemctl restart [email protected]
systemctl stop [email protected]

#OSD start/stop/restart
#0为该节点的OSD的id，可以通过`ceph osd tree`查看
systemctl start/stop/restart [email protected]

[root@ceph-1 cluster]# ceph osd tree
ID WEIGHT   TYPE NAME       UP/DOWNREWEIGHT PRIMARY-AFFINITY
-1 17.94685 rootdefault                                     
-2  5.98228     hostceph-1                                  
 0  1.99409        osd.0        up 1.00000          1.00000
 1  1.99409        osd.1        up 1.00000          1.00000
 8  1.99409        osd.2        up 1.00000          1.00000
-3  5.98228     hostceph-2                                  
 2  1.99409        osd.3        up 1.00000          1.00000
 3  1.99409        osd.4        up 1.00000          1.00000
 4  1.99409        osd.5        up 1.00000          1.00000
-4  5.98228     hostceph-3                                  
 5  1.99409        osd.6        up 1.00000          1.00000
 6  1.99409        osd.7        up  1.00000         1.00000
 7  1.99409        osd.8        up 1.00000          1.00000